Description
350W 0-10V 277V Dimming CMH Grow Light Fixture

Introduction:
SunPlix 350W 0-10V 277V Dimming CMH Grow Light Fixture utilizes Fuzzy Logic 4th Generation ballast technology. The patent technology can keep lumen maintenance rate higher than 95% at 30,000 hours and maintain the initial spectrum. It can ignite lamps more than 100 feet away.
With LamPal® technology, this ballast can work with 150W, 210W, 315W and 350W CMH/HPS/MH lamps. You can use the 0-10V module to adjust power output from 150W to 350W continuously.
When lamp power is decreased, it saves energy and shifts light spectrum to more blue light for veggies; when lamp power is increased, it outputs more strong light and shifts light spectrum to more red light to grow more and bigger flowers and shorten the growing circle.
Spectral Power Distribution:
Compatible Lamps:
Characteristics of CMH-315F IR Dimming Fixture
Name | Description |
---|---|
Input power | 389W |
Output power (Max) | 350W |
Operating voltage | 120V/208V/240V/277V |
Amperage drawn | 3.24A/120V, 1.87A/208V, 1.62A/240V |
Safe voltage | 94V~276V |
Input frequency | 50/60Hz |
Power factor | >0.99 |
THD | <6% |
Efficiency | >91% |
Communication interface | IR (0~10V optional) |
Lamp wire length (Max) | >100 feet (16 gauge lamp wire) |
Power/light output | 315W |
Protection functions | Protection of short-circuit, open-circuit, over-voltage, under-voltage, over-current, hot lamp startup, lightning, over heat, and lamp failure with lamp life warning. |
Size | L: 21”, W: 14”, H: 6” |
Net weight | 7.6 lb |
Warranty | 3 years |
Certificates | UL, CUL, FCC |
Reflector | Horizontal. Can be attached to ballast or be installed remotely. Size: L: 17”, W: 14”, H: 6”. |
Input:
Black wire: AC power Line wire
White wire: AC power Neutral wire
Green wire: Ground wire
Output:
Black wire: AC power Line wire
White wire: AC power Neutral wire
Green wire: Ground wire
Cautions:
- SunPlix 350W 0-10V 277V Dimming CMH Grow Light Fixture should work on operating voltage with corresponding bulbs. High power bulb can be used to dim to low power output, but not the reverse.
- The work environment temperature for the ballast ranges from -40 F°/-40 C° to +122 F°/+50 C°, the maximum work temperature of its shell can be +158 F°/+70 C°.
- Combustible substances and corrosive gas should not be placed in the work environment of the ballast.
- If a ballast is damaged, do not try to fix it. Users should exchange it with suppliers or send it to the factory for maintenance.
SunPlix CMH ballast is the real low frequency, square wave CMH ballast!
Other brand CMH ballast is NOT the real low frequency, square wave CMH ballast
Reviews
There are no reviews yet.