1000W Knob Dimming CMH HPS MH Ballast
SunPlix 1000W low frequency, square wave knob dimming digital ballast, is built in Fuzzy Logic technology, can keep lumen maintenance rate higher than 95% at 30,000 hours and maintain the initial spectrum.
It can ignite bulbs more than 100 feet away.
With LamPal® technology, this ballast can work with 1000W, 860W, 775W and 630W CMH/HPS/MH DE/SE bulbs.
When working on 240V, it outputs 1000W, 860W, 775W, and 630W. When working on 120V, it outputs 630W only. You can use the knob to turn on/off the ballast.
When lamp power is decreased, it saves energy and shifts light spectrum to more blue light for veggies; when lamp power is increased, it outputs more strong light and shifts light spectrum to more red light to grow more and bigger flowers and shorten the growing circle.
Characteristics of CMH-860W/K Knob Dimming Ballast
|Output power (Max)||1000W|
|Amperage drawn||5.7A(120V, 630W), 5.20A/208V, 4.71A/230V, 4.51A/240V|
|Lamp wire length (Max)||26 feet (16 gauge lamp wire)|
|Power/light output||0W (On/Off), 630W, 775W, 860W, and 1000W|
|Protection functions||Protection of short-circuit, open-circuit, over-voltage, under-voltage, over-current, hot lamp startup, lightning, over heat, and lamp failure with lamp life warning.|
|Size||L: 12.2”, W: 9”, H: 4.25”|
|Net weight||9.9 lbs|
- The digital ballast should work on operating voltage with corresponding bulbs. High power bulb can be used to dim to low power output. If you need to increase the power of low power bulb, you should install the lamp in a closed hood.
- The work environment temperature for the ballast ranges from -40 F°/-40 C° to +122 F°/+50 C°, the maximum work temperature of its shell can be +158 F°/+70 C°.
- The ballast should avoid working under high temperature environment which will affect its service life.
- If the ballast is damaged, it cannot be opened. Users should exchange it with suppliers or send it to the factory for maintenance.
SunPlix CMH ballast is the real low frequency, square wave CMH ballast!
Other brand CMH ballast is NOT the real low frequency, square wave CMH ballast